请各位大哥帮我理解一下,以下是BellcoreGR-1221_CORE中的第6.2.1冲击实验部分
Themechanicalshock(orimpact)testisbasedonMIL-STD-883,Method2002,withthefollowingconditions:
NumberofShocks:5timesperdirectionfor6directions(on3axes)
ShockLevel:500G
Duration:1ms
OR
theproceduresstatedinEIA/TIA-455-2Aforlightserviceapplications,withthe
followingconditions:
DropHeight:1.8meters(6feet)
Numberofdropsperthreemutuallyperpendicularaxes:8
Numberofrepetitionsofimpacttestcycle:5
R6-8[138]Thecomponentshallbemountedrigidlysothattheshockistransmittedtotheinternalcomponentsandnotabsorbedorcushionedbythefiberpigtailsorleads.
AsuggestedmethodofperformingthistesttoEIA/TIA-455-2Aproceduresistomountthefiberopticcomponentinsideacontainerfilledwitharigidpackingmedium(suchassandorsmallglassbeads)sothatthepackagedoesnotshiftorbouncearoundwhenthecontainerisdropped.Inthisway,theimpactshockisnotabsorbedbyanelasticpackingmaterialorbythecomponentfiberpigtailsorleads,butisfullytransmittedtotheinternalcomponents.
————————————————————————-
我的理解是这么做的,不知道有没有错误:
1)先设计包装,使包装内的产品的脆值(G)至少满足500G的要求.
2)然后通过跌落实验,就象要求中所要求的从1.8m的地方自由落下等等.
3)实验结素观察包装内结果是不是出现损坏的迹象?
500G1MS条件并不严格。
学习了,哈啊哈
机械冲击有一般来讲有3哥参数:加速度,脉宽,速度变化量;一般比较关注加速度,脉宽,每个轴向都要冲击,也就是自由落体,固定很重要,一定要是刚性连接
学习中….
学习中~
做冲击测试时,需要一些夹具把产品牢牢的固定,保证能量传递到无器件上,而不是被夹具或其他的衬垫而吸收。
应该不是,两个测试的目的都是一样的,任选其中一个即可,主要是要保证力量被传递走,而不是被吸收。