可靠性建模与优化

北科大副教授彭锐做了大量研究
可以关注他的百度百科,新浪微博

给TA打赏
共{{data.count}}人
人已打赏
可靠性技术新手提问

请教振动试验问题

2017-4-15 23:28:09

可靠性设计

天舟一号货运飞船完成技术区测试后垂直转运至发射区

2017-4-17 0:00:00

14 条回复 A文章作者 M管理员
  1. pengrui1988

    [quote][url=pid=186873&ptid=20310]irix2008 发表于 2017-7-22 14:30[/url]
    感觉理论有点太超前,难以指导工程实际[/quote]

    不可一概而论, 维修和软件可靠性的很多都是用的实际数据。 打仗的模型确实离实际还有一定距离, 正在细化。 温备份和多阶段系统主要是抽象的模型, 对于实际系统需要进行一定的修改, 但是本质思想是一样的。

  2. pengrui1988

    [quote][url=pid=186873&ptid=20310]irix2008 发表于 2017-7-22 14:30[/url]
    感觉理论有点太超前,难以指导工程实际[/quote]

    不可一概而论, 维修和软件可靠性的很多都是用的实际数据。 打仗的模型确实离实际还有一定距离, 正在细化。 温备份和多阶段系统主要是抽象的模型, 对于实际系统需要进行一定的修改, 但是本质思想是一样的。

  3. irix2008

    感觉理论有点太超前,难以指导工程实际

  4. pengrui1988

    [quote][url=pid=186660&ptid=20310]潘云星 发表于 2017-7-18 19:08[/url]
    有什么建设意见发表啊[/quote]

    每篇论文的创新之处如下
    1. Peng, R., Levitin, G., Xie, M., Ng, S.H., Defending simple series and parallel systems with imperfect false targets, Reliability Engineering & System Safety, 95(6), 679-688, 2010.

    考虑了在攻防博弈中部署伪目标, 与以往研究不同的是考虑了伪目标有一定概率被识别
      2. Peng, R., Levitin, G., Xie, M., Ng, S.H., Optimal defense of single object with imperfect false targets, Journal of the Operational Research Society, 62(1), 134-141, 2011.
    与第一篇类似, 但是考虑了模糊参数的影响
      3. Peng, R., Xie, M., Ng, S.H., Levitin, G., Element maintenance and allocation for linear consecutively connected systems, IIE Transactions, 44(11), 964-973, 2012.
    研究了如何通过调整元件位置减少维修费用
      4. Peng, R., Mo, H. D., Xie, M., Levitin, G., 2013. Optimal structure of multi-state systems with multi-fault coverage. Reliability Engineering and System Safety 119,18-25.
    研究了不完全故障覆盖下系统的最佳结构
      5. Peng, R., Li, Y.F., Zhang, J.G., Li, X., 2015. A risk-reduction approach for optimal software release time determination with the delay incurred cost. International Journal of Systems Science 46 (9), 1628-1637.
    研究了软件投放时间, 考虑了风险与成本
      6. Peng, R., Zhai, Q.Q., Xing, L.D., Yang, J., 2014. Reliability of demand-based phased-mission systems subject to fault level coverage. Reliability Engineering and System Safety 121,18-25.
    研究了异质元件组成的多阶段系统的可靠性
      7. Peng, R., Guo, Li, Levitin, G., MO, H.D., Wang, W.B., 2014. Maintenance versus individual and overarching protections for parallel systems. Quality Technology and Quantitative Management 11 (3), 353-362.
    研究了并联系统的双重保护问题
      8. Peng, R., Li, Y.F., Zhang, W.J., Hu, Q.P. Testing effort dependent software reliability model for imperfect debugging process considering both detection and correction. Reliability Engineering and System Safety, v 126, p 37-43, June 2014
    研究了软件错误的发现, 改正, 以及引入过程
      9. Wang, W., Zhao F, Peng R. A Preventive maintenance model with a two-level inspection policy based on a three-stage failure process. Reliability Engineering and System Safety, 121, 207-220, 2014.
    研究了设备的多重点检
      10. Zhai, Q.Q., Peng, R., Xing, L.D., Yang, J., 2015. Reliability of demand-based warm standby systems subject to fault level coverage. Applied Stochastic Models in Business and Industry 31 (3), 380-393.
    研究了异质温备份元件组成的冗余系统可靠性
      11. QingqingZhai, Rui Peng*, L. Xing, and Jun Yang, 2013. ” BDD-based Reliability Evaluation of k-out-of-(n+k) Warm Standby Systems Subject to Fault-Level Coverage,” Journal of Risk and Reliability ,227(5):540-548.
    研究了同质温备份元件组成的冗余系统可靠性
      12. Li, Y.F., Peng, R.* Availability modeling and optimization of dynamic multi-state series-parallel systems with random reconfiguration. Reliability Engineering and System Safety, v 127, p 47-57, July 2014.
    研究了一多阶段可变系统的维修策略
      13. Zhai, Q.Q., Yang, J., Peng, R., Zhao, Y, 2015. A study of optimal component order in a general 1-out-of-n warm standby system. IEEE Transactions on Reliability 64 (1): 349-358.
    研究了温备份系统的元件最佳顺序
      14. Xiao, H., Peng, R. Optimal allocation and maintenance of multi-state elements in series-parallel systems with common bus performance sharing. Computers and Industrial Engineering, v 72, n 1, p 143-151, June 2014.
    研究了公用总线系统中元件的分配优化
      15. Chiming Guo, Wenbin Wang, Bo Guo,Rui Peng,2013, Maintenance Optimization for SystemsWith Dependent Competing Risks Using a Copula Function, J. Maintenance and Reliability, 15(1),9-17,
    研究了相关风险下的维修策略
      16. Ola, T., Xing, L.D., Peng, R., Xie, M., 2014. Reliability of Warm-Standby Systems subject to Imperfect Fault Coverage. Journal of Risk and Reliability,228(6) 606–620.
    研究了元件级故障覆盖下的温备份系统可靠性
      17. Liu, X, Wang, W., Peng, R.*, 2015.Anintegratedproduction, inventory and preventive maintenance model for a multi-product production system. Reliability Engineering and System Safety 137 (may):76-86.
    研究了维修和生产协同优化
      18. Zhao F, Wang W, Peng R., 2015. Delay-time-based preventive maintenance modeling for a production plant: a case study in a steel mill”. Journal of the Operational Research Society66, (12), 2015-2024.
    根据钢厂实际数据估计参数并研究了最佳检修策略
      19. Liu, X., Wang, W., Peng, R.,2015. An Integrated Production and Delay-time based Preventive Maintenance Planning Model for a Multi-product Production System. Maintenance and Reliability ,17(2):215-221.
    研究了一多种产品系统的维修和生产联合优化
      20. Li, Y., Peng, R.*, 2015.Service Reliability Modeling of Distributed Computing SystemswithVirusEpidemics. Applied mathematical Modelling 39, 5681-5692.
    研究了一个分布式网络的可靠性
      21. Xiao Hui, Peng R.*, Wang, W.B., Zhao, F., 2015. Optimal Element Loading for Linear Sliding Window Systems. Journal of Risk and Reliability 230 (1), 75-84.
    研究了一滑窗系统可靠性
      22. Zhai, Q.Q., Xing, L. D., Peng, R., Yang, J., 2015. Multi-valued Decision Diagram-Based Reliability Analysis of k-out-of-n Cold Standby Systems Subject to Scheduled Backups. IEEE Transactions on Reliability,12/2015; 64(4):1310 – 1324.
    研究了一个冷备份系统可靠性
      23. Liu, X.J., Wang, W.B., Peng, R., 2015. A Delay-Time-Based Inspection Model for Parallel Systems.Journal of Risk and Reliability 229 (6), 556-567.
    研究了一个一并联系统的最佳检修模型
      24. Li, P., Wang, W., Peng, R.*, 2016. Age-based Replacement Policy With Consideration of Production Wait Time. IEEE Transactions on Reliability 65 (1), 235-247.
    考虑了生产等待下的机会维修研究了最佳维修策略
      25. Xiao, H., Peng, R., Levitin, G., 2015. Optimal replacement and allocation of multi-state elements ink-within-m-from-r/nsliding window systems.Applied Stochastic Models inBusiness and Industry 32 (2), 184-198.
    提出了一种扩展的滑窗系统, 并且研究了可靠性
      26. Xiao, H., Shi, D.M., Ding, Y., Peng R., 2015. Optimal Loading and Protection of Multi-state Systems Considering Performance Sharing Mechanism. Reliability Engineering & System Safety 149, 88-95.
    研究了公用总线系统的最佳负载和保护策略
      27. Peng, R., Zhai, Q., Levitin, G., 2016. Defending a single object against an attacker trying to detect a subset of false targets. Reliability Engineering & System Safety 149, 137-147.
    研究了包含攻防战和情报战的博弈
      28. Peng R., Zhai Q., Xing L., Yang J., 2016. Reliability analysis and optimal structure of series-parallel phased-mission systems subject to fault level coverage. IIE Transactions. 48 (8), 736-746.
    研究了串并联多阶段系统的最佳结构
      29. Peng, R., Liu H., Xie M., 2016. A Study of Reliability of Multi-state Systems with Two Performance Sharing Groups. Quality & Reliability Engineering International. ,32(7):2623-2632
    研究了包括多个性能共享组的系统可靠性
      30. Yu Huan, Yang Jun, Peng, Rui, Zhao Yu., 2016. Linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps. Reliability Engineering & Systems Safety 150, 35-43.
    提出了一个扩展的连续系统模型
      31. Wang, G., Peng, R., 2016.A generalized δ-shock model with two types of shocks.International Journal of Systems Science: Operations & Logistics. Forthcoming.
    研究了两种冲击下的系统可靠性
      32. Zhai Qingqing, Ye Zhisheng, Peng, Rui, Wang Wenbin, 2016. Defense and Attack of Performance-Sharing Common Bus Systems. European Journal of Operational Research.256(3):962–975
    研究了公用总线系统的攻防策略.
      33. Wang, H., Wang, W., Peng, R.*, 2017.A two-phase inspection model for a single component system with three-stage degradation. Reliability Engineering & System Safety 158: 31-40.
    研究了一个三阶段故障元件的检修策略
      34. Yang, L., Ma, X., Peng, R., Zhai, Q., Zhao, Y., 2017.A preventive maintenance policy based on dependent two-stage deterioration and external shocks. Reliability Engineering & Engineering Safety 160,201-211.
    研究了一个包括内部失效和外部冲击的单元的检修策略
      35. Peng, R., Xiao, H., Liu, H.Reliability of Multi-state Systems with a Performance Sharing Group of Limited Size. Reliability Engineering & System Safety. Forthcoming.
    研究了一个共享组大小有限的系统的可靠性
      36. Hu, L., Su, Peng, Peng, R., Zhang, Z., 2017. Fuzzy Availability Assessment for Discrete Time Multi-State System under Minor Failures and Repairs by Using Fuzzy-transform. Eksploatacja i Niezawodnosc– Maintenance and Reliability 2,179-190.
    研究了一离散时间多态系统的可用性
      37. Peng, R., Zhai, Q., 2017. Modeling of Software Fault Detection and Correction Processes with Fault Dependency. Eksploatacja i Niezawodnosc– Maintenance and Reliability. Forthcoming.
    研究了错误相关情况下的软件错误发现和改正过程
      38. Wang, C., Xing, L., Peng, R., Pan, Z., 2017.Competing failure analysis in phased-mission systems with multiple functional dependence groups. Reliability Engineering & System Safety 164, 24-33.[2]
    研究了包含保障传播和传播阻断的系统可靠性
    39. Jia, H., Ding, Y., Peng, R. 2017. Reliability Evaluation for Demand-based Warm Standby Systems Considering Degradation Process. IEEE Transactions on Reliability. Forthcoming.
    研究了一个多态温备份系统可靠性
    40. Liu, X., Wang, W., Peng, R., 2017. An Integrated Preventive Maintenance and Production Planning Model with Sequence-dependent Setup Costs and Times. Quality and Reliability Engineering International. Forthcoming.
    研究了一个生产系统的维修和生产协同优化, 考虑了成本与生产顺序的相关性

  5. 潘云星

    有什么建设意见发表啊

  6. tototm

    学习了

  7. pengrui1988

    [quote][url=pid=181067&ptid=20310]admin 发表于 2017-4-17 22:22[/url]
    你是彭教授本人吧?

    欢迎来到中国可靠性网,从百科看,彭教授参于的科研项目都好高大上,希望能多来可靠性 …[/quote]

    欢迎关注我的论文, 合适的可以引用. 哈哈. 谢谢.

  8. pengrui1988

    [quote][url=pid=181390&ptid=20310]yxlsdbz 发表于 2017-4-21 12:45[/url]
    这个帖子目的是什么[/quote]

    促进交流

  9. yxlsdbz

    这个帖子目的是什么

  10. 张非2017

    学习

  11. 张非2017

    你好

  12. admin

    你是彭教授本人吧?

    欢迎来到中国可靠性网,从百科看,彭教授参于的科研项目都好高大上,希望能多来可靠性论坛,给大家指导交流。

  13. yeh

    [url]http://baike.baidu.com/item/%E5%BD%AD%E9%94%90/20299236[/url]
    彭锐(北京科技大学东凌经济管理学院副教授)
    2007年7月本科毕业于中国科学技术大学少年班光信息科学与技术专业;2011年10月毕业于新加坡国立大学工业与系统工程系,获得博士学位。2012年1月进入北京科技大学经济管理学院,2014年7月破格晋升为副教授。主要研究领域为系统可靠性分析,优化,以及系统的保护和维修策略。已发表近40篇SCI期刊论文,主持或参与5项国家自然科学基金,一项教育部博导基金,一项博士后面上资助,和三项中央高校基本科研业务费。

个人中心
购物车
优惠劵
今日签到
有新私信 私信列表
搜索