熔融指数仪
用途：
本设备主要用于测试熔融黏度较高（流率在0.15—50G/10MIN之间）
之热塑性塑胶等材料在制程中聚合物流率之均匀性，广泛应用于塑料
生产、塑料制品、石油化工等行业及有关院校、科研单位和商检部门。
本设备设计符合ASTM-D1238、D3364，ISO-1133，UNI-5640，GB3682-
83等热塑性塑料熔体流动速率试验方法。
主要技术参数
01.温控范围：常温–400℃，精度±0.5℃以内，波动度：±0.5℃；
02.标准负荷：0.325KG，1.200KG，2.160KG，3.800KG，5.000KG，10.000KG，21.600KG；
03.料筒尺寸：内径：Ф9.55±0.025mm，长度为160mm；（材质：耐腐蚀高硬度合金钢）
05.口模尺寸：内径2.095±0.005mm，内壁光洁度不低于0.2um，高度为8.000±0.025mm。（材质：碳化钨）；
07.切料装置：手动切料、自动切料可供选择；
08.设备体积: 420×250×630MM；
09.设备重量:38kg(不含砝码)
10.加热功率：550W
11.电源要求: 1∮,AC220V,5A
Melt Index
Use:
The device used to test high melt viscosity (0.15-50 G/10MIN flow rate in between)
The thermoplastic plastic materials such as polymers in the process of the flow rate of uniformity, widely used in plastics
Production, plastics, oil and chemical industries and related institutions, research units and commodity inspection departments.
Equipment designed to meet the ASTM-D1238, D3364, ISO-1133, UNI-5640, GB3682 –
83, and other thermoplastic melt flow rate test methods.
Main technical parameters
01. Temperature range: room temperature – 400 ℃, accuracy within ± 0.5 ℃, volatility: ± 0.5 ℃;
02. Standards load: 0.325 KG, 1.200KG, 2.160KG, 3.800KG, 5.000KG, 10.000KG, 21.600KG;
03. Liaotong Size: diameter: Ф9.55 ± 0.025mm, a length of 160 mm; (Material: corrosion-resistant high-alloy steel hardness)
05. Die Size: diameter of 2.095 ± 0.005mm, wall finish of not less than 0.2 um, height of 8.000 ± 0.025mm. (Material: WC);
07. Shear device: manually cut expected, automatically cut material available;
08. Volume of equipment: 420 × 250 × 630MM;
09. Equipment weight: 38 kg (excluding weight)
10. Heating power: 550 W
11. Power requirements: 1 ∮, AC220V, 5A
: 145kg
联系：简户仪器（北京）有限公司,010-81237540,
北京朝阳区建国路88号现代城SOHO2906#
